Description

Where truly stunning, fruitful, specimen plants are concerned this package of automated watering systems gives you an edge over all other means of cultivation

Requiring no electricity or mains water, the 12Pot Greenhouse nonetheless provides incredibly responsive irrigation and feeding which is individually tailored to each plants needs. Across all varieties, through warm and cold spells, dryness and humidity, your creations can draw exactly what they need from the system 24/7, and thrive. The system is specifically designed to defy all expectations of a plants full potential.

With one AQUAvalve water control device per plant the 12Pot Greenhouse offers a level of directed watering that helps to produce superb results. This is especially true with heavy-feeding varieties in the vegetative stage and demanding, larger-than-average plant types in the crucial fruiting and flowering stages.

Power-Free With Zero Waste

As with all AutoPot Watering Systems, this Package requires no electricity or mains water to operate. Supply is powered 100% by gravity. Because of this you can set up practically anywhere.

Simply elevate your reservoir or water butt 150cm above the highest placed pot in your system and you will have ample gravity pressure to keep water flowing straight to your plants.

You can leave the system unattended in confidence, whilst saving a fortune on utilities, safe in the knowledge that yours is an eco-friendly choice.

Responsive To All Plant Needs

As well as being 100% power-free the supply of irrigation to your plants is regulated solely by consumption. Thanks to the AQUAvalve water control device in every AutoPot Watering System your plants get to draw exactly what they need, every time, and thrive.

How AQUAvalve Works

Your plant sits in a pot. The pot features perforations in the base that allow the uptake of water from beneath. The planted-up pot is placed in a tray. In that tray, connected to your reservoir via pipework, is the AQUAvalve.

The AQUAvalve opens to allow water and (if desired) fertiliser solution to enter the tray to a depth of 20mm. Only once the plant in the pot has consumed all of the water in the tray does the AQUAvalve reopen to admit a fresh supply.

Based on an innovative double-float valve design this is a globally unique means of watering and feeding which we call ‘Plant Controlled Irrigation’.

Any Variety, Any Climate

Plant Controlled Irrigation means that you never have to worry about over- or under-watering Regardless of the variety or fluctuations in climate the plants and the system will arrive at the correct level of irrigation by themselves. It’s completely responsive with any variety in any climate.

The Complete System

All you need to add to the Package is your reservoir of choice. Everything else is included.

Durable, heavyweight, and good for many years of use, the pots and trays are U.K. manufactured from 100% recycled plastics. The same goes for the AQUAvalves, fittings, and pipework which are consistent, water-tight, and precision machined for a clean flow.

You get complete, easy-to-use instructions that allow you to set up tool-free in minutes, plus plenty of handy tips on how to maintain and optimise your system.

Additional information

Weight	28.17 kg

Further info

This system is ideal for bushy growing plants such as chillies, peppers & aubergines.

The 1Pot Extension Kits that comprise the system are supplied with 15 litres pots as standard but can also be used with 8.5 litre pots.

We recommend a minimum reservoir capacity of 200 litres with this system

If your reservoir / water butt is placed inside the greenhouse, 1 or 2 modules will need to be taken away from suggested layout.

Raise your reservoir / water butt 150mm / 6” above ground level

How long the reservoir will last depends on:

- - The size of the plants
  - The weather

A fully established tomato plant with an abundance of tomatoes can consume up to 2 litres of water during a 24 hour period.

How it works

1. Set Up Your Reservoir

• Fill a water reservoir with nutrient-rich water.

Ensure the reservoir is elevated slightly to allow gravity-fed irrigation.

2. Connect the Pipes and AQUAvalve

• Connect the pipes from the reservoir to the AutoPot trays.

• The AQUAvalve is placed in the tray and controls the water flow based on the plant needs.

3. Place the Plants in the AutoPot System

• Each pot sits in a tray that holds water.

• The system automatically delivers water when needed.

4. The AQUAvalve Controls Watering

• Once connected to the reservoir, the AQUAvalve allows 20mm into the tray and then

shuts off. The AQUAvalve will not reopen, until the plants have consumed all the water in the tray. Allowing the plants to go through a wet and dry cycle.

5. Plants Absorb Water as Needed

• Plants take up water from the tray via capillary action.